SFP 100G SR4 850nm 100Mtr QSFP28+
Price: Rs 7631.80
100G SR4 850nm 100Mtr QSFP28+
General Description:
This product is a parallel 100 GB/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings. An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP28 module. The cable usually cannot be twisted for proper channel-to-channel alignment. Electrical connection is achieved through an MSA-compliant 38-pin edge-type connector. The module operates on a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt, and Low Power Mode, are available with the modules. A 2-wireserial interface is available to send and receive more complex control signals and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.
Features:
- Hot-pluggable QSFP28 form factor
- Supports 103.1 GB/s aggregate bit rate
- 4x25G electrical interface
- Compliant to IEEE 802.3bm 100GBASE-SR4
- MTP/MPO optical connector
- Up to 100 m OM4 MMF transmission
- Digital diagnostic SFF-8636 compliant
- RoHS-6-compliant and lead-free
- Compliant with QSFP28 MSA
- Single +3.3V power supply
- Maximum power consumption: 2.0W
- Case operating temperature: Commercial (exact temperature range not provided)
Applications:
- Data Center
- Fiber channel
- Ethernet switches and router applications
Electrical and optical characteristics:
| Parameter | Symbol | Min. | Typ. | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Power Consumption | P | 2.0 | W | |||
| Supply Current | Icc | 600 | mA | |||
| Transmitter Single-ended Input Voltage Tolerance | Vcc | -0.3 | 4.0 | V | ||
| Differential Input Voltage Swing | Vin,pp | 180 | 1000 | mVpp | ||
| Differential Input Impedance | Zin | 90 | 100 | 110 | Ohm | 1 |
| Transmit Disable Assert Time | 10 | us | ||||
| Transmit Disable Voltage | Vdis | Vcc-1.3 | Vcc | V | ||
| Transmit Enable Voltage | Ven | Vee | Vee+0.8 | V | 2 | |
| Transmitter Center Wavelength | λC | 840 | 850 | 860 | nm | |
| Optical Spectral Width | ∆λ | 0.6 | nm | |||
| Average Launch Power each lane | PAVG | -8.4 | 2.4 | dBm | ||
| Optical Extinction Ratio | ER | 2 | dB | |||
| Transmitter and Dispersion Penalty | TDP | 4.3 | dB | |||
| Transmitter OFF Output Power | Poff | -30 | dBm | |||
| Transmitter Eye Mask Compliance | Compliant with IEEE802.3ae | |||||
| Receiver Center Wavelength | λC | 840 | 860 | nm | ||
| Receiver Differential Output Voltage Swing | Vout,pp | 300 | 850 | mVpp | ||
| Differential Output Impedance | Zout | 90 | 100 | 110 | Ohm | 3 |
| Data output rise/fall time | Tr/Tf | 28 | ps | 4 | ||
| LOS Assert Voltage | VlosH | Vcc-1.3 | Vcc | V | 5 | |
| LOS De-assert Voltage | VlosL | Vee | Vee+0.8 | V | 5 | |
| Rx Sensitivity per lane | Sen. | -10.3 | dBm | 1 | ||
| Input Saturation Power (overload) | Psat | 2.4 | dBm | |||
| LOS Assert | LOSA | -26 | dBm | |||
| LOS De-assert | LOSD | -12 | dBm | |||
| LOS Hysteresis | LOSH | 0.5 | dB |
Here are some related SFP links below:
SFP 100G BIDI QSFP28 LR1-10Km:
SFP 100G BIDI QSFP28 LR1-20Km: