SFP 10G, BIDI TX1270nm/RX1330nm, 60KM, LC DDM 5

SFP 10G, BIDI TX1270nm/RX1330nm, 60KM, LC DDM:

The SFP 10G 60KM LC module is a high-performance transceiver designed for 10 Gigabit Ethernet applications that require long-distance connectivity. With a maximum transmission distance of 60 kilometers, this module is optimized for extended-range networking deployments where reliable and high-speed connectivity is essential.

Featuring an LC connector interface, the SFP 10G 60KM LC module ensures secure and reliable connectivity with standard LC interfaces commonly found in networking equipment. This interface facilitates easy installation and compatibility with a wide range of networking devices.

This module operates using single-mode fiber (SMF), which enables efficient data transmission over longer distances while maintaining signal integrity and minimizing signal loss. The use of SMF makes the SFP 10G 60KM LC module suitable for long-distance networking applications where reliable connectivity over extended ranges is required.

The SFP 10G 60KM LC module complies with industry standards and is hot-swappable, allowing for convenient installation and replacement without interrupting network operations. It operates over a wide temperature range, making it suitable for deployment in various environmental conditions.

Applications of SFP:

Back to Back

10GBASE-ER/EW

10G Ethernet

Features of SFP:

Up to 11.1 GB/s data

1270nm DFB laser and APD receiver for HTSX-B273396Kx

1330nm DFB laser and APD receiver for HTSX-B332796Kx

2-wire interface with integrated Digital Diagnostic monitoring

Up to 60km transmission on SMF

BIDI LC optical connector

Single +3.3V power supply

Metal enclosure, for lower EMI

Maximum power consumption: 1.5W

RoHS-6-compliant and lead-free

SFF-8472 MSA-compliant, and SFF-8431

Operating case temperature

Commercial: 0 ~ 70oC

General Description:
SFP+ transceiver is designed for use in10- 10-gigabit Ethernet links up to 60km over single-mode fiber .The module consists of a CWDMDFB laser, APD, and preamplifier in a highly integrated optical sub-assembly.It also defines a sophisticated systemof alarm and warning flags which alerts end-users when particular operating parameters areoutside of a factory-set normal range.
The SFP+ MSA defines a 256-byte memory map in EEPROM that is accessible over a wired serial interface at the 8-bit address 1010000X (A0h). The digital diagnostic monitoringinterface makes use of the 8-bit address 1010001X (A2h), so the originally defined serial IDmemory map remains unchanged.

 It is now available in Dtechtrading, Nepal.

Here are some related SFP links below:

SFP 10G, BIDI TX1270nm/RX1330nm, 20KM, LC:

SFP 10G, BIDI TX1270nm/RX1330nm, 10KM, LC:

SFP 10G, BIDI TX1330nm/RX1270nm, 80KM, LC:

SFP 10G, BIDI TX1270nm/RX1330nm, 40KM, LC: