DTMC-200 10/100/1000 Mbps adaptive RJ45 port AC Port

The 10/100/1000M Series Gigabit Converter is subject to copyright protection. No part of this publication may be reproduced without prior consent from the copyright owner.

FCC Warning

The 10/100/1000M series media converters have been tested and comply with Class A digital device standards as per Part 15 of the FCC Rules. These devices are designed to offer reasonable protection against harmful interference when used in commercial environments. However, improper operation in residential areas may cause interference with radio communications, for which the user will be responsible for addressing.

CE Mark Warning

These products are Class A devices. In domestic environments, they may cause radio interference, necessitating appropriate preventive measures by the user.

Package Contents

Thank you for choosing our Ethernet Media Converter. Before installation, ensure the following items are included in the package:

1. Media Converter
2. User’s Manual
3. Power Adapter

Product description:

Features

The 10/100/1000M Series Gigabit Converter is designed to meet the needs of larger workgroups requiring Ethernet network expansion. Featuring an RJ45 jack and SC or SFP fiber optic connectors, it connects 10/100/1000BASE-TX networks to 1000BASE-SX/LX (fiber optic) networks. In full duplex mode, the converter extends distances up to 550 meters for Multi-mode fiber and up to 80 kilometers for Single-mode fiber. It fully complies with IEEE 802.3z & 802.3ab standards, and its installation and operation procedures are simple and straightforward. Real-time operation status can be easily monitored via LED indicators on the front panel.

Package Contents

Thank you for purchasing our Ethernet Media Converter. Before installation, please ensure the following items are included in the package:

1. MDI-MDIX Auto-crossover supported
2. Plug-and-Play installation
3. Support for Link Alarm
4. Support for flux controlling of full duplex/backpressure of half duplex, with the capability to transmit 1600-byte management packets.
5. Compliance with IEEE802.3z 1000Base-SX/LX & IEEE 802.3ab 1000Base-T standards
6. Optional work wavelengths: 850nm, 1310nm, 1550nm
7. Dynamic data transmission between RJ45 and fiber ports, with indicators for full/half duplex and speed lights
8. Support for internal and external power supply, with UTP port supporting 10/100/1000M auto-negotiation.

Cable Connection of 10/100/1000M  Series Gigabit Converter

LED Indication

Please refer to the following table for LED indication of 10/ 100/ 1000M Series Gigabit Converter

Specifications of 10/100/1000M Series Gigabit Converter

Typical Optical Power Budget

Installation

As with any electric device, you should place the equipment where it will not  be  subject  to  extreme  temperatures,  humidity,  or  electromagnetic interference.  Specifically,  the  site  you  select  should  meet  the  following requirements:

Please follow the steps to install the media converter. This Converter is a plug-and-play device.

1. Turn off the power of the  device/station  in the network  in which the media converter will be installed.

2. Ensure that there is no activity in the network.

3. Attach fiber cable from the media converter to the fiber network. The fiber connections must be Matched-Transmit socket to receive socket

4. ttach a UTP cable from the 1000Base-Tx network to the RJ-45 port onthe product

5. Connect the power cord to the media converter and check if the power

LED lights up. The Link/Act Link and FX link LED will light when all thecable connections are satisfactory.

6. Turn on the power of the device/station.