Fusion Splicer Fujikura 50S 103

Discover our latest products and services

Fusion Splicer Fujikura 50S 103

Rs 0.00

(3 Reviews)

Product Info

Unit: Set(1)
Product ID: 956

This is a new standard of core to core aligning arc fusion splicer.

A number of improvements have been added to the performance-proven Profile Alignment System (PAS) platform, resulting in the smallest and lightest package of its kind. With improved splice & tube-heat time, the splicing operation is the world's fastest truly optimized for field use. Other valuable features include an ergonomic design, reduced numbers of operating steps and a powerful battery extend the boundaries of traditional field fusion splicing performance. The movable monitor and dual-direction operating system essentially gives the operator a choice of two splicers. With these features, the FSM-50S is now more than a tool, it is a work of art.

Features

Fully automatic core alignment with 9 second splice time for SM fiber
Reduced splice protector shrink time ﾖ now only 35 seconds
Extremely compact and lightweight ﾖ just 2.8kg
Automatic fibre type identification
Multi-position monitor for front or top mounting
High capacity battery option for 120 splice/shrink cycles
Real time arc calibration
Fibre clamps integrated into wind protector to reduce operation time

Dual-directional operating system

The reversible monitor accommodates the user's ergonomic preference. With a control panel on each side, the ease of use is phenomenal.

Splice time of 9 sec.

Improved computer processing and newly introduced stepping motor help achieve 9 sec. splice time with SM fiber.

Tube-heat time of 35 sec.

Advanced heater design shortens tube-heat time to 35 sec. with FP-03 protection sleeve.

Large capacity battery option

Two types of slot-in batteries BTR-06S and BTR-06L are available.

Arc calibration-free system

Time-consuming arc calibration is no longer requried with real- time arc calibration.

Specifications:

Applicable fibers	SM（ITU-T G.652）, MM（ITU-T G.651）, DS（ITU -T G.653）, NZDS（ITU-T G.655）
Fiber Count	Single
Cladding diameter	80 to 150μm
Coating diameter	100 to 1000μm
Fiber cleaved length	8 to 16mm with coating diameter of 250μm or less. 16mm with coating diameter of 250 to 1000μm. Optional set-plate for 8 to 16mm with coating diameter of 250 to 1000μm is available.
Actual average splice loss	0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards.
Splice time	Typical 9sec. with standard SM fiber
Return loss	>>60dB
Splicing modes	40 user programmable modes and up to 60 modes for reference（factory predetermined setting）
Splice loss estimate	Available
Attenuation splice function	Intentional high splice loss of 0.1dB to 15dB（0.1dB step）can be made for an in-line fixed attenuator.
Storage of splice result	The last 2000 results to be stored in the internal memory
Fiber display	X / Y, or both X and Y simultaneously
Magnification	295x for single X or Y view, or 147x for X and Y view.
Viewing method	Two CMOS cameras and 5.6 inch color LCD monitor.
Operating condition	0 to 5000m above sea level, 0 to 95% RH and -10 to 50 respectively.
Mechanical proof test	2N（standard）/ 4.4N（option）
Tube heater	Built - in tube heater with 10 heating modes and up to 20 modes for reference
Tube heat time	Typical 35sec. with FP-03 protection sleeve
Applicable protection sleeve length	60mm, 40mm and a series of micro sleeves
No.of splice/heating with battery	Typical 80 cycles with BTR-06（S）/ Typical 160 cycles with BTR-06（L）
Power supply	Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-11. 13.2Vd.c. with BTR-06（S / L）.
Terminals	USB 1.1（USB-B type）for PC communication. Video terminal RCA video jack / NTSC
Wind protection	Max. wind velocity of 15m/s
Dimensions	150W x 150D x 150H (mm)
Weight	2.3kg（2.8kg including AC adapter ADC-11）

Here are some related splicing machine link:

This is a new standard of core to core aligning arc fusion splicer.

Features

Fully automatic core alignment with 9 second splice time for SM fiber
Reduced splice protector shrink time ﾖ now only 35 seconds
Extremely compact and lightweight ﾖ just 2.8kg
Automatic fibre type identification
Multi-position monitor for front or top mounting
High capacity battery option for 120 splice/shrink cycles
Real time arc calibration
Fibre clamps integrated into wind protector to reduce operation time

Dual-directional operating system

The reversible monitor accommodates the user's ergonomic preference. With a control panel on each side, the ease of use is phenomenal.

Splice time of 9 sec.

Improved computer processing and newly introduced stepping motor help achieve 9 sec. splice time with SM fiber.

Tube-heat time of 35 sec.

Advanced heater design shortens tube-heat time to 35 sec. with FP-03 protection sleeve.

Large capacity battery option

Two types of slot-in batteries BTR-06S and BTR-06L are available.

Arc calibration-free system

Time-consuming arc calibration is no longer requried with real- time arc calibration.

Specifications:

Applicable fibers	SM（ITU-T G.652）, MM（ITU-T G.651）, DS（ITU -T G.653）, NZDS（ITU-T G.655）
Fiber Count	Single
Cladding diameter	80 to 150μm
Coating diameter	100 to 1000μm
Fiber cleaved length	8 to 16mm with coating diameter of 250μm or less. 16mm with coating diameter of 250 to 1000μm. Optional set-plate for 8 to 16mm with coating diameter of 250 to 1000μm is available.
Actual average splice loss	0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards.
Splice time	Typical 9sec. with standard SM fiber
Return loss	>>60dB
Splicing modes	40 user programmable modes and up to 60 modes for reference（factory predetermined setting）
Splice loss estimate	Available
Attenuation splice function	Intentional high splice loss of 0.1dB to 15dB（0.1dB step）can be made for an in-line fixed attenuator.
Storage of splice result	The last 2000 results to be stored in the internal memory
Fiber display	X / Y, or both X and Y simultaneously
Magnification	295x for single X or Y view, or 147x for X and Y view.
Viewing method	Two CMOS cameras and 5.6 inch color LCD monitor.
Operating condition	0 to 5000m above sea level, 0 to 95% RH and -10 to 50 respectively.
Mechanical proof test	2N（standard）/ 4.4N（option）
Tube heater	Built - in tube heater with 10 heating modes and up to 20 modes for reference
Tube heat time	Typical 35sec. with FP-03 protection sleeve
Applicable protection sleeve length	60mm, 40mm and a series of micro sleeves
No.of splice/heating with battery	Typical 80 cycles with BTR-06（S）/ Typical 160 cycles with BTR-06（L）
Power supply	Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-11. 13.2Vd.c. with BTR-06（S / L）.
Terminals	USB 1.1（USB-B type）for PC communication. Video terminal RCA video jack / NTSC
Wind protection	Max. wind velocity of 15m/s
Dimensions	150W x 150D x 150H (mm)
Weight	2.3kg（2.8kg including AC adapter ADC-11）

Here are some related splicing machine link:

Additional Specifications

Base Unit	Set(1)
Category	Optical Fusion Splicer & accessories
SKU
Product Code	180
Trackable	Yes
Taxable	Yes

Fusce dapibus, tellus ac cursus commodo, tortor mauris condimentum nibh, ut fermentum massa justo sit amet risus. Integer posuere erat a ante venenatis dapibus posuere velit aliquet. Cras mattis consectetur purus sit amet fermentum. Maecenas sed diam eget risus varius blandit sit amet non magna. Sed posuere consectetur est at lobortis. Curabitur blandit tempus porttitor. Aenean lacinia bibendum nulla sed consectetur. Nulla vitae elit libero, a pharetra augue. Morbi leo risus, porta ac consectetur ac, vestibulum at eros. Praesent commodo cursus magna, vel scelerisque nisl consectetur et.

No videos available for this product.