SFP+ transceiver is designed for use in 10 Gigabit Ethernet links up to 10km over single mode fiber. The module consists of CWDM DFB Laser, PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. Our SFP transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage. SFP also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range. The SFP+ MSA defines a 256-byte memory map in EEPROM that is accessible over a 2- wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic monitoring
Parameter | Symbol | Min | Max | Unit | Notes |
---|---|---|---|---|---|
Storage Temperature | TS | -4 | 8 | °C | |
Power Supply Voltage | VC | 0 | 5 | V | |
Relative Humidity | CR | -0.5 | 3.6 | % | |
Damage Threshold |
THd |
5 | 9 | dBm |
Part Number |
Data Rate (Gb/s) |
Wavelength (Transmission) |
Wavelength (nm) |
Distance (km) |
Fiber Type |
Temperature (°C) (Operating Case) |
HT SX B273396LC |
10.3125 |
1270Tx/1330 Rx |
1330Tx/1270 Rx |
10 |
SMF |
0~70 (commercial) |
HT SX B332796LC |
10.3125 |
1270Tx/1330 Rx |
1330Tx/1270 Rx |
10 |
SMF |
0~70 (commercial)
|
you can also check Similar SFP with various length at us.
SFP 20km (https://emancommunications.com.np/optical-fiber-sfp-10g-20km-in-nepal)
SFP 40km (https://emancommunications.com.np/sfp-10g-40-km-in-nepal)
SFP 60km (https://emancommunications.com.np/sfp-10g-60km-in-nepal)
SFP 80km (https://emancommunications.com.np/sfp-10g-80-km-in-nepal)
Leave your detail here, we will call you back
Support for all your needs, in one place. Sign in to get personalized help and access your registered devices, software and existing service requests.