SFP 1.25G Bidi Tx1310nm/Rx1550nm 20KM LC

SFP Overview:

"SFP 1.25G BIDI 20KM 1550TX/1310RX LC" refers to a specific type of Small Form-factor Pluggable (SFP) transceiver module designed for optical communication networks. Here's what each part of the description means:

• SFP: Small Form-factor Pluggable. This indicates the form factor and interface type of the transceiver module. SFP modules are hot-pluggable and widely used in networking equipment.

• 1.25G: This denotes the data transfer rate supported by the transceiver, which is 1.25 Gigabits per second.

• BIDI: Short for bidirectional. This indicates that the transceiver is capable of bidirectional communication over a single fiber optic strand by using different wavelengths for upstream and downstream traffic.

• 20KM: Specifies the maximum distance over which the transceiver can reliably transmit data, which in this case is 20 kilometers.

• 1550TX/1310RX: These numbers represent the wavelengths used for transmitting (TX) and receiving (RX) data. Specifically, data is transmitted at 1550 nanometers (TX) and received at 1310 nanometers (RX).

• LC: Refers to the type of optical connector used with this transceiver. LC connectors are commonly used in fiber optic networks due to their small size and low insertion loss.

Applications for SFP 1.25G 20KM LC

•  Switch to Switch Interface
• Gigabit Ethernet
•  Switched Backplane Applications
• Router/Server Interface
•  Other Optical Links

Features OF SFP 1.25G 20KM LC

 Up to 1.25Gb/s data links

 1310nm FP laser transmitter and PIN photodetecto

r  Up to 20km on 9/125µm SMF

 Hot-pluggable SFP footprint

 BIDI LC/UPC type pluggable optical interface

 Low power dissipation

 Metal enclosure, for lower EMI

 RoHS compliant and lead-free

 Support Digital Diagnostic Monitoring interface

  Single +3.3V power supply

 Compliant with SFF-8472

 Case operating temperature

Commercial: 0 ~ +70oC

Extended: -10 ~ +80oC

Industrial: -40 ~ +85oC

Part Number Ordering Information FOR SFP 1.25G 20KM LC

 .Absolute Maximum Ratings FOR SFP 1.25G 20KM LC
It has to be noted that the operation in excess of any individual absolute maximum ratings
might cause permanent damage to this module.

Recommended Operating Conditions and Power Supply Requirements FOR SFP 1.25G

General Description

Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector .The module data link up to 20km in 9/125um single mode fiber.The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the
system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input opticalsignal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.

In summary, the SFP 1.25G BIDI 20KM 1550TX/1310RX LC is a hot-pluggable transceiver module capable of bidirectional communication at a data rate of 1.25 Gigabits per second over a single fiber optic strand, with a maximum transmission distance of 20 kilometers. It uses 1550 nanometers for transmission and 1310 nanometers for reception and utilizes LC optical connectors.