HSGQ EPON SFP

Discover our latest products and services

HSGQ EPON SFP

Rs 2488.50

(3 Reviews)
Available Variants
Px20+++ 9db (Slug missing) Px20++ 7db (Slug missing) Px20+ 5db (Slug missing)
Product Info
  • Unit: pc(1)
  • Product ID: 1768

-0.00% Rs2488.50 Rs2488.50

Per pc(1)
Product Specifications
  • Compatible: HSGQ, BDCOM
  • Warranty: 1 Year
  • Description

    This 1490nm DFB EPON OLT SFP transceiver is designed to transmit and receive optical data over single  mode optical fiber for link length 20km.

    The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled.

    The module provides differential termination and reduce differential to common mode conversion for quality signal  termination and low EMI.

    The transmitter converts 1.25Gbit/s serial CML electrical data into serial optical data compliant with the 10GBASE-LR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 kΩ.

    TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the SFP+ module transmitter output shall be turned off. This contact shall be pulled up to VccT with a 4.7 kΩ to 10 kΩ resistor The receiver converts 1.25Gbit/s serial optical data into serial PECL electrical data. An open collector compatible Loss of Signal is provided. Rx_LOS when high indicates an optical signal level below that specified in the relevant standard. The Rx_LOS contact is an open drain/collector output and shall be pulled up to Vcc_Host in the host with a resistor in the range 4.7-10 kΩ, or with an active termination. Power supply filtering is recommended for both the transmitter and receiver. The Rx_LOS signal is intended as a preliminary indication to the system in which the SFP is installed that the received signal strength is below the specified range. Such an indication typically points to non-installed cables, broken cables, or a disabled, failing or a powered off transmitter at the far end of the cable.

     

    Features

    o    1.25Gb/s serial optical interface compliant to 802.3AH  specifications  small form factor pluggable module “SFP” 

    o    1490 nm DFB transmitter, 1310 nm APD photo detector BURST receiver 

    o    2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers 

    o    Operating case temperature: 0 to 70 °C or-40 to 85 °C 

    o    All-metal housing for superior EMI performance 

    o    Low power consumption 

    o    Cost effective OLT solution, 

    o    RoHS compliant 

     

Additional Specifications
Base Unit pc(1)
SKU
Product Code 55
Trackable Yes
Taxable Yes

No videos available for this product.

You Might Also Like

L3 Managed Industrial Switch HSGQ

L3 Managed Industrial Switch HSGQ

Rs 33600.00

Wi-Fi 6 5400Mbps Outdoor AP

Wi-Fi 6 5400Mbps Outdoor AP

Rs 32415.92

4K HDMI Splitter

4K HDMI Splitter

Rs 2.00

Fast Connector Scale

Fast Connector Scale

Rs 210.00

Mini UPS

Mini UPS

Rs 2566.30

Audio Video TV-Out Cable

Audio Video TV-Out Cable

Rs 94.50

OPGW Enclosure

OPGW Enclosure

Rs 2.00

Android Box Amlogic

Android Box Amlogic

Rs 1486.73

D-TECH Fiber cleaver DT-10

D-TECH Fiber cleaver DT-10

Rs 2654.87

Ratings & Reviews

No reviews yet. Be the first to review this product!

Login to leave a review.

Free Shipping

Free Nationwide Delivery

Enjoy fast and free delivery across Nepal on all orders above Rs. 5,000. No hidden charges.

Easy Returns

30-Day Hassle-Free Returns

Shop with confidence. Return or exchange your product within 30 days if you're not fully satisfied.

Warranty

Up to 2 Years Warranty

All our products come with a standard warranty of up to 2 years, covering manufacturing defects.